We know Water

The Pooltester blocks are manufactured in durable clear polyacrylate and have long-lasting printed colour standards. Pooltester kits (except SP 315) are supplied in a pocket-sized case which may be used either free-standing or wall mounted. This range of kits is further supplemented by tests based on the Palintest tablet count method, and a test for cyanuric acid stabiliser level using a turbidity method.

Palintest's Pooltest test kits use safe DPD and phenol red tablets for a quick and simple check on pool or spa chemistry. The new Pooltest kits couldn't be simpler to use: simply dip the test block in the water, add the tablets then read the result from the colour scale.

Available in the following configurations:

• SP600: mini kit for free chlorine (0.5 - 5 mg/l) and pH (6.8 - 8.4)
• SP610: free chlorine (0.1 - 1 and 0.5 - 6 mg/l) and pH (6.8 - 8.4)
• SP612: free chlorine (0.5 - 5 mg/l), pH (6.8 - 8.4) and alkalinity (0 - 250 mg/l)
• SP614: free chlorine (0 - 3 mg/l), pH (6.8 - 8.4) and alkalinity (0 - 250 mg/l)
• SP616: bromine (0.5 - 8 mg/l), pH (6.8 - 8.4) and alkalinity (0 - 250 mg/l)
• SP315: free chlorine (0 - 6 mg/l), pH (6.8 - 8.4), alkalinity (0 - 500 mg/l) and calcium hardness (0 - 500 mg/l) (Langelier Index)
• SP315C: free chlorine (0 - 6 mg/l), pH (6.8 - 8.4), alkalinity (0 - 500 mg/l), cyanuric acid (0 - 200 mg/l) and calcium hardness (0 - 500 mg/l) (Langelier Index)
• SP618: copper (0 - 1 mg/l), pH (6.8 - 8.4) and alkalinity (0 - 250 mg/l)
• SP623: hydrogen peroxide (5 - 50 mg/l) and pH (6.8 - 8.4)
• SP624: PHMB (0 - 100 mg/l), pH (6.8 - 8.4) and alkalinity (0 - 250 mg/l)
• SP625: PHMB (0 - 100 mg/l), pH (6.8 - 8.4) and hydrogen peroxide (5 - 50 mg/l)
• SP620: cyanuric acid (0 - 100 mg/l)
• SP622: salt (0 - 8800 mg/l)
• SP626: oxygen (1.0 - 15 mg/l) and pH (6.8 - 8.4)
• PK079: chloride (0 - 1000 mg/l)
• PK166: aluminium (0 - 0.5 mg/l)

Downloads:

Pooltester_kits_ti_eng.pdf

[Technical information, English]

1028 Kb